Lazer Lamps Fog Light Upgrade Kit

Advantages of the Lazer Lamps Fog Light Upgrade Kit for your campervan

Upgrade the lighting performance of your Mercedes Sprinter (2018+) with the Lazer Lamps Fog Light Upgrade Kit. This kit is designed specifically for Sprinter W907 and W910 vehicles and significantly improves visibility and safety while driving at night or in difficult weather conditions.

The kit includes two Carbon-2 ‘Drive’ LED lamps that provide both a powerful high beam driving light and an additional yellow dipped beam for off-road conditions. With a simple switch, the lamps can change to the yellow dip beam, which improves visibility in fog, rain, dust, or snow.

Together the lamps deliver 6.240 raw lumens in high beam mode, providing excellent illumination of the road ahead. The lights are UNECE approved under Regulation 149 (Class B driving light, E-Ref 12.5) for use as an auxiliary high beam on public roads.

The lamp housings and bezels are made from high-strength, UV-stable PC-ABS material, ensuring durability and long-term resistance to weather and environmental conditions. The holders feature Lazer’s textured finish which matches the rugged look of the Sprinter without the need for additional painting.

This upgrade kit is suitable for Sprinter models both with and without original fog lights. Vehicles with OE fog lights can simply replace the original units with the supplied lamp holders, while vehicles without fog lights can use the included cutting templates for precise installation.

The kit also includes white and amber programmable backlight options, allowing you to select the preferred colour during installation.

Designed and manufactured in the UK, the kit is built to the highest standards and comes with a 5 year warranty.

Lazer Lamps Fog Light Upgrade Kit installation requirements

The kit includes everything required for installation.

Contents of the kit:

• Lamp holders with Carbon-2 DRIVE (Yellow Dip) lamps pre-mounted (left and right)
• Positioning templates (left and right)
• Two-lamp wiring harness kit
• Load resistors (2x)
• Black T-25 Torx security screws (10x) with security bit
• T-30 Torx security bit
• Screw clips (6x)

For vehicles with LED headlights it is necessary to use the Lazer CANNY interface solution. A smart button can also be installed to manually activate the dip beam mode in adverse weather conditions.

For vehicles without original fog lights, the included cutting templates ensure accurate and straightforward installation.

Lazer Lamps Fog Light Upgrade Kit specifications

• Compatible with Mercedes Sprinter W907 / W910 (2018+)
• Compatible with vehicles with and without OE fog lights
• Includes Carbon-2 ‘Drive’ LED lamps with yellow dip beam function
• High beam approved under UNECE Regulation 149 (Class B driving light, E-Ref 12.5)
• Combined luminous flux: 6.240 Lm
• Driver FOV luminous flux: 3.672 Lm
• High beam colour temperature: 5.000 K
• Yellow dip beam for off-road use in adverse conditions
• Power consumption: 58 W
• Peak current draw: 5,2 A
• Current draw at 14,4 V: 4,2 A
• Voltage range: 10-32 V
• LED lifespan: 50.000 hours
• Connector: 4-pin Deutsch DT
• Beam angle: 60° horizontal / 12° vertical
• IP rating: IP68
• EMC certification: ECE R10
• Salt spray tested according to ISO 9227
• Dump load protection: ISO 7637-2
• Lamp housing made from UV-stable high-strength PC-ABS material
• Black and white lens covers available
• Designed and manufactured in the UK
• 5 year warranty

Product Disclaimer

The regulations for lighting upgrades are different per country. It is your responsibility to check what your country requires. dutchvanparts does not accept any liability nor hold responsibility for the regulations you need to abide by or any problems you might encounter with this product.